No matter how high quality your longboard is, it needs regular maintenance to keep its integrity intact. You will need to clean and grease the bearings regularly to keep them running smoothly. Even a low-end longboard will render good performance if you maintain it well, this will also increases the lifespan of the board. Longboard maintenance can be done at home or at the workshop, here are some of the tips on how to maintain a longboard.
Maintaining Your Longboard
Maintaining a longboard is crucial to keep it running correctly and prolonging its life. The history of the longboard shows that a well-kept longboard will last longer and perform better. There are many ways you can maintain your ride so that it can offer excellent performance and last you a couple of years. Here are some of the steps you can do to maintain your longboard for better performance.
1. Cleaning Wheels and Bearings
Well-kept wheels and bearings will grant you smoother performance. It is essential to clean the wheels of your longboard after every ride to rid them of the dust and debris stuck in them. It is better to change the sides of wheels, which will last them longer as one side of wheels deteriorates more than the other. In addition to that, always check for the signs of wearing, because worn-out wheels damage the longboard and the trucks.
Moreover, weary wheels cause a lot of instability in the ride and can be dangerous. It is best to avoid dirty pathways, puddles, and mud terrains; however, if you happen to ride on such a path, it is best to clean them properly using a washcloth and brush. After cleaning, dry the wheels properly so that the water does not seep inside. Lastly, keep replacing the old worn-out wheels with new ones for better performance.
As for the bearings, their maintenance plays a vital role in the better performance of your longboard. They are responsible for the smooth rolling of your longboard’s wheels. Any dirt or water droplets in bearings can cause rust on them and decrease their performance. Taking good care of the bearings will not only prolong the life of your longboard but will also render smooth performance.
To clean your longboard bearings, you need to gently take them out and put them into a container full of kerosine oil. Kerosene oil is cheap and easy to work with; besides, it helps remove old grease from the bearings and rid them of dirt particles.
After that, take the bearings out gently and clean your bearings with isopropyl alcohol which will help remove leftover dirt. It is very effective in removing various substrates. You will see squeaky clean bearings. After that, clean the bearings with a washcloth and let them air dry. You will need to re-lubricate the bearings after installing them back into your longboard.
2. Bearings Lubrication
Lubrication of the longboard bearings is a crucial step because they cannot perform without proper greasing. Well, lubricated bearings offer smoother performance, more stability, increased speed, and a better experience. You can easily lubricate the longboard bearings with any available grease. It is better to opt out for good-quality lubricant so that it can have lasting effects.
3. Deck’s Maintenance
The deck is another vital component of your longboard. It keeps you balanced and allows for a stable ride. Even a premium quality deck is prone to warping due to water and scratches, and sun exposure. Make sure you buy a well-made and well-strengthened longboard with waterproofing features. If you cannot find one, you can always paint the deck with waterproof paint or enamel. Painting the longboard’s deck will protect it from moisture damage.
In addition to that, sun exposure decreases the deck’s life by causing degeneration. Keep your longboard away from the sun when you are not riding on it. Moreover, keep the deck safe from impacts and scratches. If there are some scratches, fill them with enamel so that they can be protected from water splashes and moisture damages.
4. Trucks Maintenance
The truck is another essential component in your longboard that needs your special attention. Each longboard comes with two tracks that are responsible for the movement and turning of your longboard. They can be easily tightened or loosened; to clean the longboard’s trucks, you need to detach them from the deck.
After that, dust off all the mud and dust with a cloth and rinse them with plain water. You can use any cleaning solution available in the store, or you can make your own soapy water solution at home. After that, rinse them thoroughly with soapy water and rub them with a cleaning brush. Make sure the brush reaches every nook and cranny. Next, you will rinse the trucks with plain water to make sure it doesn’t feel soapy.
After that, clean the truck with a clean washcloth. Repeat the above process if needed. Now, you can dry the truck with an air blower or let them air dry for some time before reinstalling them. Cleaner and well-maintained trucks will allow for smoother turning and smoother performance. Clean trucks also allow for the stability and longevity of your longboard. These are pretty much all the steps you need to follow to keep the integrity of your longboard intact.
Longboard Maintenance Tips Infographic
Longboard Maintenance’ FAQs
Is it necessary to maintain a longboard?
Like every other vehicle and ride, the longboard also needs regular checkups and maintenance. It is made up of wheels, bearings, trucks, and a deck. For smoother and stable performance, you need to grease the bearings and clean your longboard regularly. Also, the deck of your longboard needs to be enabled or painted with waterproof paint to protect it from warping due to water splashes. You can also take your longboard to your local workshop for regular maintenance to prolong its life.
What happens if you maintain your longboard?
A poorly kept longboard will give up on its performance sooner, if not later. If you don’t clean the wheels, bearings, and trucks regularly, it will cause jamming of the longboard. In addition to that, you will feel a shaky and unstable ride due to all the dirt accumulated in these components. Besides, moisture and sun rays can cause warping of the longboard’s deck therefore, it is necessary to keep it protected from sun and water damage.
Can you maintain your longboard at home?
While it is good to visit your nearby workshop for the regular maintenance of the longboard, you can also do that in the comfort of your home. Your longboard needs simple steps to keep it performing well. For instance, you need to regularly clean the wheels, trucks, and longboard bearings to keep it running smoothly. Other than that, your deck also needs cleaning and maintenance. For that matter, you will need to waterproof your deck and keep filling all the scratches that appear with time.
Any vehicle, appliance or device needs regular maintenance to keep them running with ultimate smoothness and prolong their life. In the same way, a longboard also needs timely workshop visits so that it can perform better and last you a couple of years. You can also maintain your longboard at home without spending a penny. We have listed some of the easiest steps in the above section on how to maintain a longboard.
Spencer Barton Lands Every Flat Ground Trick
After 29,968 trick attempts in a span of roughly two years, Youtuber skater Spencer Barton was able to land every flat-ground trick.
He documented his journey on his YouTube channel.
Spencer Barton participated in the Battle at the Berrics 12 under the influencer category last year, competing against Jamie Griffin. Griffin won the influencer bracket and eventually came out as the overall champion.
How to Look Cool Wearing a Skateboard Helmet – Flaunt Them Looks
Wearing helmets is considered odd in a fashion sense, while it’s nothing more than a myth. You can look dashing and modern with a skateboard helmet if you know what and how to wear it. Well, that sounds a little tricky because there are too many options in today’s market, and I can’t review each. So I decided to help you provide a guide on How to Look Cool Wearing a Skateboard Helmet regardless of the product you choose.
Since we are talking about helmets, we must be aware of their benefits. A helmet is not something included in a fashion wardrobe but safety gear that should be worn while you’re on the board. There have been a lot of accidents, even deaths, in the past, which happened because of the absence of a helmet because a helmet protects our head region where the most crucial organ of our body locates, i.e., the brain. So, none of us wants to risk our lives on risk.
Still, I am sure many teenagers might be thinking about their looks more than their safety, while others are worried about the irritating comments by their fellows. Don’t fret, folks! This article is dedicated to all those outlook-sensitive riders who think wearing a helmet is not cool because I will change this mindset by giving the best possible ways to look great with safety gear.
How to Look Cool Wearing A Skateboard Helmet
I started skating very early when I wasn’t aware of safety precautions and considered the harsh nicknames seriously. With time, experiences taught me that there is nothing more important than your health; as we all heard, “Health is Wealth, “I decided to never give up on any precautionary equipment, but what about those ruthless comments? I started trying some ways to look cool anyway and I am sharing those methods below:
Change Your Mindset
Your mindset is the leading cause behind all this dilemma! Let’s suppose you’re wearing a beautiful outfit but inside, you kept thinking wrong about that; what would happen? You will lose your self-confidence, and stress will appear on your face. So, you see, the problem is not in the dress but in your mentality, which needs to be changed immediately.
I know things take time to become smoother, but try to change your mind as fast as possible. Trust me; you will feel better only if you will think better! It is always a better idea to assume positive thoughts rather than considering the adverse outcomes only. What do you think is better: neglecting your friends’ stupid comments or lying on a hospital bed? The decision is all yours!
Select the Best Option
Come on, skaters! We are already living in 2022; the market has expanded by introducing various modern, stylish, and highly convenient helmets. There are hundreds of options, each claiming itself the excellent one, but the best one for you should suit your head size, fashion sense, etc. To purchase the best skateboard helmet, buyers should consider the following factors: build quality, size, brand, reliability, color or visuals, breath-ability, comfort, and resistance.
Sounds confusing? I know; that’s why I will share a few perfect skateboard helmets, which I found excellent. However, there is no restriction, you can choose according to your preference freely. The first choice is the “Thousand Heritage Helmet,” which stays on the head uniformly and provides a great fit. This helmet comes with a magnetic lock system which is pretty modern, convenient, and reliable. The best thing is that this is ASTM and CPSC-certified safety gear.
Secondly, I found “Triple 8 Gotham” one of the most comfortable and reliable helmets. It boasts effortless adjustment, which will save you extra time. This helmet has holes over it which ensures breath-ability, and air ventilation also facilitates sweat-free rides.
Third and last, I refer “Protec Sticker Bomb,” which looks so cool and beautiful. If you’re conscious about fashion sense, then you’ll love this funky colorful helmet. Its incredible visuals don’t compromise its quality; it is a highly durable and reliable helmet. The best feature of this safety gear is its unique ventilation mechanism because of its eleven open vents. Isn’t it flawless?
Embellish Your Helmet
What if you got a plain black helmet? Seems dull? Don’t stress! You can decorate it with your favorite colors, patterns, stickers, or whatever you have. It will be fun if you perform this creative activity with your skating partners. All you have to do is collect some markers, stickers, or labels like retro, matte, vivid colors, Osiris labels, and more. Then, gently attach those onto your plain helmet randomly, and you’re done!
Moreover, you can also create patterns using markers if you’re good at drawing. Please make sure to use good quality waterproof markers for this activity to avoid fading away later. When you are done with the decoration, keep the helmet for drying, and guess what? It is all set to wear!
Does Tony Hawk wear protective gear?
Yes, Tony Hawk, who is a famous American skateboarder, does wear all safety gear. At the professional level, it is strictly prohibited to ride a skateboard without precautionary equipment. A helmet is one of the essential protective gear for skateboarding.
What do professional skateboarders wear?
As I said before, professionals are not allowed to ride without wearing protective gear. All skateboarding competitions follow this rule strictly. During skateboarding, riders wear helmets for head and face protection, arm pads for securing their limbs, and knee pads for the safety of joints. Some skateboarders wear goggles, too, for eye protection.
Why is skateboarding bad?
In my opinion, skateboarding is not bad if done protectively. However, some people think that skating is a risky activity, especially for younger kids, because they have poor stability, coordination, and balance. Plus, their bones are less developed, which puts them at high risk of injuries.
I hope that all your concerns related to the outlook of wearing a helmet will be clear now. Please never forget that safety always comes first. You need to be careful about yourself, be a bit creative, and choose the best helmet from the market. Then, there will be no way you look odd wearing a helmet!
Happy Skating 🙂
How Long Do Skateboards Last – Skateboards Lifespan FAQs
Most skaters wonder how long do skateboards last before buying a new one. Tricky yet important to know because it will help you decide which kind of board you should buy for yourself. Judging the life of a skateboard is tricky because it depends on multiple diverse factors.
The lifespan of the skateboard really depends on the usability and the riding style. After spending years in skateboarding, we came to the conclusion that a skateboard can last between 5 months to 2 years. Don’t forget the factors like maintenance, built quality of the deck and weather conditions also determine the life of your skateboard. Some skaters will still be shredding the same skateboard for years and some will get it broken within months.
The quality of production, the technique of use, the environment of use, and maintenance all will affect how long the board stays in good condition. Skateboarding is a fun and healthy sport that is now becoming a source of commuting as well. Keep in mind that different shapes and types of boards are used for different purposes, and so their life span will also vary.
Due to an increase in demand and interest, skateboards with different lengths, widths, strengths, heights, and durability are available. For an occasional skater who rides on smooth surfaces and takes proper care of parts, the board will last for years.
For passionate users that use daily or learn different stunts in harsh environments, the board will last only months after which the deck will break or either the bearings will rust. Deck, bearings, trucks, and wheels are the most important parts of a board and are affected differently by use. These parts are individually available, and only the affected part can be changed without any need of purchasing a new one.
To learn how long do skateboards last we’ll go through the life of individual hardware parts, their cleaning technique and factors most often damaging them.
How Long do Skateboards Last?
Board decks are the most expensive and the ones most easy to wear and tear. Longboards used just for riding last longer. On average, a longboard lasts between 2 weeks to 5 months. Material and frequency of use also determine life expectancy of the skateboard. Usually, thicker decks last longer than other ones and occasional smooth is most safe than flipping and jumping. Keep these two listed points in consideration to increase the deck life.
- Keep deck away from moisture
Decks are made up of wood. Wood absorbs water and becomes damaged. Immediately dry off the deck after water skating or keep the board in the air to let dry off completely.
- Proper maintenance at home
Whether the edges have become sharp or some small cracks are visible use glue to seal off the spaces. With cracked decks, it’s necessary not to overload the deck or perform technical stunts.
How long do skateboard trucks last?
Trucks last for years as they are made of metal so no need to change a truck unless few small cracks occur or the axle is bent. Truck parts are available in the market so no need of buying a new set frequently. Trucks provide attachment for wheels to the deck and so are very important. Whenever the deck is damaged, it’s best not to be careless and go out on a ride as it can have severe consequences and the rider can get severely damaged. Do you feel a problem taking turns? Has the ride become jerky with time? These are the signs that your trucks need attention. If the size of the truck is fine, then get individual parts from the nearby shop, and your issue will be solved. Clean trucks after a dirty ride with a cloth soaked in soapy water and then properly dry them.
Do you feel a squeaky noise every time you ride the board? Lubricate your pivot cup and bushings. When these surfaces are too dry, turning the hanger in the pivot cup causes the noise. If you don’t know about how to select the right skateboard truck, you can read the reviews of best skateboard trucks.
How long do skateboard bearings last?
Are your wheels not spinning properly? Check the bearings on your skateboard. Cleaning and lubricating bearings solve the issue. Bearings are the part of the board that tends to accumulate most dirt and dust. Bearings last for years with proper maintenance. Each wheel has two bearings so to clean remove the bearings from the wheel and spray them with a cleaner or use a bearing cleaning kit manufactured by brands. Please don’t place the bearings in the water at all or don’t try cleaning them with water. Water rusts and erodes bearings and leaves you with the only option to buy a new set. Completely dry off your bearings or else get ready for a new purchase. Use an air dryer for drying off moisture. Lubrication is a must for bearings so that the ride is smooth and stable.
You can read the reviews of some of the best skateboard bearings here.
Bearings are made of steel. Steel is sensitive to water, so avoid using skateboard in water. After frequent rides, the board will be dirty. The bushings will have accumulated dirt and will cause issues while riding. Don’t make the mistake of lubricating a dirty bearing because then the dirt will get more dissolved and clog the bearing. Remove your bearings and clean them properly using a brush and cleaning solution once every three months if you are not a frequent user and once every month if you use your board in harsh environments often.
How long do skateboard wheels last?
Wheels are affected by how frequently and in what manner you use them. The wheels will get flat spots and get rugged due to daily use. For experienced pro skaters, the wheels will last only two weeks to 3 months due to excessive use but for beginners the wheels can last for years as. When wheels get flat spots the speed reduces, and the rider needs to push harder, so it’s better to change wheels. The wheels turn yellow as the urethane degrades with time.
Rotating the wheels is best to ensure even wearing and prolong life span. Remove all four wheels and put your right front wheel in place of the left rear wheel similarly put your left front wheel in place of the right rear wheel. When wheels are often rotated, changes of quick tearing are reduced. Moreover, If you don’t know which skateboard wheels are best for you, you can read the reviews of Skateboard Wheels and can easily select the right wheels for your skateboard.
Do you own high-quality skateboard wheels? If yes, then you’ll enjoy a fast ride and long durability. Hard wheels can endure more than soft wheels, but both wheels have different speeds and features. Soft wheels work with longboards for street skating. If you feel instability during the ride first adjust the axle nut, it should be loose or tight. The nut does become loose after use, and you can tighten it using a skate tool or screwdriver.
How to prolong the life of a skateboard?
Now you know all the individual parts of life and what affects them the most. Skaters often wonder how long do skateboards last, but nobody can give a perfect number. Some good tips for every skater about how to take care of their board, so it lasts long enough.
- Don’t use skateboard in wet conditions
Water is harmful not only for your deck but trucks, bearings, wheels as well. The deck wood will absorb the moisture to become weak and break easily or slit open. Protect your board from rain and if it does get wet, somehow use an air dryer to dry it off quickly. Do not dip board in water for cleaning it’s worst it will do a lot of harm and damage. If you want to clean the deck, use a cloth to wipe off the surface.
- Proper maintenance of skateboard
Like any other machine, your skateboard needs your attention and needs to be cleaned off from time to time. If you pay no heed and let dirt accumulate for long, the damage is irreparable, and you need to buy a new one. Cleaning a skateboard is very simple and easy for even beginners. Sand the edges of your skateboard to avoid tearing. Sanding will make edges smooth and avoid any damage from chipping. Use a skate tool to take wheels off from the axle. Remove bearings from a wheel. Place them in a cleaning solution and brush and dry off afterwards. Lubricate bearings using grease and wipe away dirt from wheels and trucks. Wheels can be dipped in the cleaning solution for enough time to soften the dirt and grime, but all other parts shouldn’t be.
- Using tail guards for the skateboard
The most frequent issue of every skater is tail scrapping. If you learn the proper technique to stop the board, and you can avoid this problem. Tail scrapping causes razor tails thus damaging your board deck. The board will chip and tear down. The right way to stop the board is to use your shoe heel to stop. Dragging tail along the ground is what wears it down so keep tail above ground. Avoid using your ground on rough hard surfaces if you want to prolong the life of the board. Skateboarding in skate parks and car parks saves board from a lot of damage as they have smooth surfaces.
- Symmetrical shape skateboard
The front and tail surface of a deck have different lengths and shapes, but now many companies are offering symmetrical skateboards which means you can ride your board anyway there’s no tailor front end. And considering how long do skateboards last it’s important to consider the shape of the deck.
How to Clean Grip Tape
Don’t soak the grip tape in water or brush it off you’ll rip it off and destroy it. Use Company manufactured grip tape cleaners so it will last you long. You can buy some of the Best Grip Tapes for your skateboard.
Skateboarding is a trendy fun sport that’s equally beneficial as well. The people intending to buy one might be thinking how long do skateboards last, for all beginning skaters it is encouraging to know that skateboards last long and individual parts can be purchased and replaced. Some queries which some people have regarding skateboards are listed next
Is cleaning parts important for skateboard life?
Yes, individual parts maintenance affects the whole board. Cleaning a skateboard is easy even for beginners. Clean deck, trucks, and wheels with some cleaning solution while for bearings use bearing cleaning kit. Dry off all parts afterwards as moisture is very harmful to the whole board. It causes irreversible damage to different board parts. Lubricate the bearings and use sandpaper to make the edges smooth. Also, it avoids it from chipping off.
Does tail guard help prolong board life?
Yes, it does help. Due to tail scraping the tail becomes thin and is called razor tail. Tail scrapping is a technique of stopping a moving board by dragging the tail along the ground. Harsh grounds damage the tail wood extensively and cause it to chip off. Using a tail guard is one way to save the tail from damage; otherwise, the rider can learn the proper technique of stopping the board, riding on the smooth ground, or use an asymmetrical board.
We hope that you must have cleared your question about how long do skateboards last. Skateboarding is a fun, cheap and a pretty cool sport. The life of a skateboard depends on its manufacturing, maintenance, use, and quality. The factors are so diverse that no one time limit can be given for all boards. The Skaters should be cautious about using board only on smooth, dry surfaces if they want it to last for years. Cleaning and lubricating parts are key to a good ride experience even after long. Rough use damages all parts and ultimately leads to the need for buying a new one. If you have never bought a skateboard, we recommend checking out these Best Skateboards For Beginners.
Skateboard has very few simple parts which can be changed about damage. Skater won’t need to buy a whole new one. Thus avoid all such acts which destroy board, e.g. tail scraping, flipping, jumping, dipping in water, and overloading. For smart users, the board will last in good condition for years.
Improve Your Ledge Game with Tom Asta’s Tips
Tom Asta is back to help you get better at skating. This time, he goes beyond the basics and teaches...
Tom Asta Shares the Keys To Skating Nollie
Tom Asta continues to share skating tips and tricks on his YouTube channel. This time he covers how he goes...
Tom Asta Shares the Keys to Locking In Flatbars
Tom Asta continues his mission to share his skateboarding knowledge on his YouTube channel. This time around, he imparted the...
Matt Beare Bares the Secret to Taking Flat Tricks to Other Spots
In his latest YouTube video, Matt Beare of “The Daily Push” bared the secret to taking flat tricks to other...
Learn How to 360 Flip from P-Rod
Paul Rodriguez gave tips and tricks on how to execute the 360 flip in his latest YouTube video. The Primitive...
Tom Asta Shares the Keys to Holding Slides and Grinds
In his latest video, Tom Asta shared the keys to holding slides and grinds. You can watch more of Tom’s...
Tom Asta Explains the Break in Process for New Trucks
In his latest Youtube video, Tom Asta breaks down the process of breaking in new trucks. Tom has been sharing...
Dominick Walker’s Tips and Techniques to Master the Kickflip
Want to master the kickflip? Watch this video from Transworld Skateboarding. In this video, Pro skater Dominick Walker will guide...
Brazilian Skaters Sweep SLS 2023 Super Crown in Hometown Victory
Andrew Arthur: From Sponsored Skateboarder to Fashion Photographer
Sota Tomikawa for Creature Skateboards
Skateboard Wizard Richie Jackson in ‘Skate Tales’
Felipe Nunes Shares His Story in ‘Hawk vs. Wolf’ Podcast
Get to Know the Exposure 2023 Winners
IOC Announces Winners of First Let’s Move Street Challenge
Carlisle Aikens Shows What It’s Really Like to Be a Pro Skateboarder
Independent Trucks Launch New Collab Helmet and Pads Collection
The Berrics is Moving to a New Location
Andrew Arthur: From Sponsored Skateboarder to Fashion Photographer
The Transworld Skateboarding crew catches up with Andrew Arthur in this episode of “Brain Floss.” Andrew Arthur was raised in...
Sota Tomikawa for Creature Skateboards
Hailing from Hokkaido, Sota Tomikawa showcases his ninja-like abilities in part 2 of this Creature Double Feature. He expertly uses...
Skateboard Wizard Richie Jackson in ‘Skate Tales’
Richie Jackson, a pro for Death Skateboards, holds the record for the most-watched video part in Thrasher’s history. He has...
Get to Know Vitória Mendonça
Madars Apse links up with fellow Element pro-skater Vitória Mendonça in this episode of Red Bull’s “Skate Tales.” Vitória’s skating...
100 Ways to Do a Melon Grab by Aaron Jaws Homoki
Professional skateboarder Aaron “Jaws” Homoki demonstrates 100 different ways of doing a melon grab in this video by STORIED. Jaws,...
CONTESTS6 months ago
Battle at the Berrics 13 Starts Next Week
HOWTO6 months ago
Tom Asta Shares the Keys to Locking In Flatbars
CULTURE6 months ago
Here’s How Kento Urano Won Damn Am Japan
News5 months ago
Leticia Bufoni Parts Ways with Monarch
INTERVIEWS3 months ago
Ryan Sheckler Joins ‘Hawk vs. Wolf’ Show
CONTESTS5 months ago
Nyjah Huston Claims Victory in Men’s Street at WST Rome 2023
TEAM CHANGES5 months ago
Asics Skateboarding Goes Global
CULTURE6 months ago
‘Skate Tales’ Puts the Spotlight on the Elusive Wes Kremer