Connect with us

HOWTO

How to Teach Your Dog to Skateboard – Tips For Dog Owners

Published

on

Are you more of a skateboard person than a walking person?

Does your dog want you to take him on a walk but you’d rather go skating?

If that’s the case then you must be looking for a solution about How to Teach Your Dog to Skateboard.

Well, we have the perfect solution for you!

You can just teach your dog to skateboard with you by following a few simple and easy steps.

Yes, you read that right.

Teaching your dog to skateboard is not something that only professionals can do but you can also do it from the comfort of your home by following only a few simple steps.

Interested in learning more?

Let’s go!

Teaching Skateboarding to Your Dog

Before starting the teaching process you must ask a few things yourself by looking at the qualities of your dog.

Below we have discussed the things you must consider before teaching skating to your pup.

Is Your Dog Capable of Skateboarding?

You must be thinking that isn’t every dog capable of doing this?

The answer is no.

Not all dogs have the physical capability of hopping onto a skateboard and riding into the sunset.

Dogs with smaller legs and smaller physiques will not be able to learn this trick even if you spend weeks teaching them so it will just be a waste of time.

On the other hand, stronger dogs like bulldogs have a muscular back end which makes it easier for them to learn how to skateboard like pros.

Another important thing that you need to do is to ask your dog’s vet whether your dog is healthy enough to learn these tricks.

You don’t want to push your dog too far because this will only ruin your relationship with him and will reap no benefits at all.

Attract Your Dog Towards the Skateboard

Your dog will not approach a new object like a skateboard willingly until you lure him towards it with some treats.

Lucky Dog Lessons: Train Your Dog in 7 Days
$27.99 $21.56

The celebrity dog trainer and Emmy-winning star of the CBS show Lucky Dog shares his training system to transform any dog—from spoiled purebred puppy to shelter-shocked rescue—into a model companion in just seven days.

11/16/2022 03:00 pm GMT

Just leave your dog’s favorite treats on the skateboard.

This will make your dog come towards the skateboard on his own.

Advertisement

This way he will come to the skateboard himself and smell it.

This is a relatively easy step and you might achieve it within a day.

Familiarize Your Dog With a Skateboard

The first and most important step is to help your dog get comfortable with the skateboard (check out, the best skateboards for dogs).

You need to be extremely patient and allow your dog to calmly explore the skateboard on his own.

Make sure you’re holding down the board so that it doesn’t slide or move when your dog puts its paws on the board.

Make sure there aren’t any sudden movements because these might scare your dog away.

Be as gentle as you can so that your dog recognizes the skateboard as a toy or something fun to play with.

Initiate With Small Movements

Once your dog is familiar with the skateboard, start off with small movements.

Move the skateboard gently with your dog on it.

You need to make him have fun with the skateboard.

You need to move towards having your dog on the skateboard with all 4 paws.

Do not scold your dog or be impatient during this process.

This is all very new to your dog so let him take one step at a time.

Praise Every Small Achievement

Every single time your dog puts his paws on the skateboard or tries to move it, give him the treat to reinforce this behavior.

Make sure that he knows they you are very proud of him and this will motivate him to try new tricks.

Get Your Dog to Skateboard on His Own

This is the trickiest part of the whole process and may take the longest time.

Your dog will not start skating overnight and you need to accept and understand this.

LOSENKA Pet Skateboard Complete Designed for Dogs and Pets (French Bulldog)
$125.54
  • 26 IN long x 8.27 IN wide deck made of Canadian cold press 6-ply natural maple with max load weight 150Ibs.
  • Highly responsive 5-inch aluminum alloy trucks and ultra-high elastic PU support pad, provide control, stability, and great maneuverability.
  • Durable 60mm X 45mm 80A PU wheels with a matte finish, ABEC-9 high-speed bearings.
  • The overall skateboard adopts a lightweight design and softer rebound bushings, which are more suitable for dogs or cats.


11/16/2022 06:20 pm GMT

Put some kind of leash on your skateboard so that it is under your control.

This will help prevent any accidents which might scare off your dog.

With your dog’s paws on the skateboard, push the skateboard so that your dog learns to balance its weight on the board.

Advertisement

Gradually your dog will try to copy the pushing movement and will try to push himself with one paw.

Make sure you keep praising him with treats.

Move a little away from your dog and call him.

Try to make him come toward you on the skateboard and reward him with treats if he does so.

Safety Precautions

You need to ensure that the skateboard is safe for your dog.

This includes making sure that it is the right size for him.

If you have a heavier dog, you need to invest in a bigger and sturdier skateboard that can easily bear the weight of your dog.

Do not begin teaching your dog in a place where it could be exposed to cars or even skaters.

Try to begin the lessons either at home or in your garage or garden.

Gradually move on to a park and even when you finally take your dog out in the open, try to be as careful as possible to prevent any kind of accident.

In the initial weeks make sure you are not riding at high speeds and also that you are in very close proximity to your dog’s board.

Once your dog starts skateboarding on their own, keep a good check on its paws and overall health because sometimes skateboarding may hurt your dog’s paws and it may get worse if you don’t keep a check on it.

Make sure that they are eating right and that there are no abrupt changes in their routine or behavior.

To Conclude

After reading this precise guide you must have learned now How to Teach Your Dog to Skateboard.

Teaching your dog how to skateboard can be good for you as well as your dog.

You will be able to take your dog along for your favorite hobby and your dog will enjoy the extra time that you spend with him.

If you have a high-energy dog then this activity can be particularly useful in taming them because they will be directing all their attention and energy towards learning this new task.

It’s a win-win for everyone.

We hope you are able to complete this task successfully.

If you still have any more questions, you can reach out to us and we would love to assist you.

Advertisement

Good luck!

Advertisement
Click to comment

Leave a Reply

Your email address will not be published.

HOWTO

How to Clean Skateboard Wheels – Simple & Easy Tips For Skaters

Published

on

How to Clean Skateboard Wheels – Simple & Easy Tips For Skaters

Are you in search of techniques to help you clear the dirt from your amazing skateboard wheels? Has your skateboard speed reduced due to excessive use? This article will list the easy methods that will teach you How to Clean Skateboard Wheels easily by yourself. Skateboarding is a very popular and fun sport. To avoid the hassle of traffic, Skateboarders often use skateboards for commuting. Skateboarding can help with daily travel and save money and time.

People using skateboards for travel will accumulate dirt, hairs, thread, mud, and other obstacles in them. Dirt built up inside wheels slows the speed. Dirt removal increases the life of skateboards and saves money. Bearing balls also accumulate dirt easily as they have space between them. This dirt sticks and makes rolling hard. It will take much effort to propel the skate as wheels are hard and the ride with be bumpy.

Cleaning dirty skateboard wheels is a very easy process. Even beginners can easily learn to clean their skateboard wheels at home. The process is very simple and quick so anyone can learn it quickly. If you feel your skateboard speed is reduced or you are using your board excessively then its a clear signal that you need to clean the wheels of your skateboard.

To begin cleaning wheels firstly get all the required stuff ready. Keeping all the required stuff around will save a lot of hustle and make cleaning quick and easy.

List of things needed for cleaning skateboard wheels

  • A wrench or skate tool
  • Cleaning solution
  • Citrus spray cleaner
  • Toothbrush
  • lubricant oil
  • Pin
  • Cloth or tissue paper

Place all the necessary stuff near your skateboard and wear gloves if you feel necessary. Wheels and bearings have to be dipped in a solution so that dirt becomes soft. This step can cause skin sensitivity in some individuals or might cause dryness so those people can wear gloves for precaution. Follow the steps listed next orderly to have exceptionally clean wheels at the end.

Step1:

Position skateboard and remove wheels

Position the skateboard upside down. The deck riding surface will be facing down and the wheel will be up. Use a skate tool and remove the axle nut from the wheels. Remove all skateboard wheels using the same technique. Next, remove a washer. Place all-wheel parts in one place so that they are not lost and you can find them later easily. Nuts and washers are small and can be easily misplaced so it is better to keep a container near and place them in it.

Placing nuts and washers organized in a container will make it easy for you while reassembling. Some skateboards might not come with a skateboard tool so use a wrench instead. Select wrench size according to the wheel nut size. Remove nuts of all four wheels and next simply slide the wheels off from the truck axle.

Step2:

Removing bearing from wheels

This step will require some hard work. Some skate tools have a protruding end for extracting the bearing. The bearing press is a device used from removing or replacing the bearings at a shop. This can help a skater easily remove the bearing. Another technique to remove the bearing is to pry the wheel and bearing about a half-inch onto the axle. Next twist the angle of your wrist so that the bearing will come out. Bearings have to be separated from the wheel before cleaning as water exposure is harmful to the bearing. The bearing will rust and erode if exposed to water. Rusted bearings need to be replaced as they hinder the efficiency of the skateboard.

This step can be hard depending on the type of wheel. Screwdrivers can be used to extract bearings. Put a screwdriver in the middle of the wheel then put some pressure and pull the bearing out. Each wheel contains two bearings. An outer and an inner bearing with the spacer in between. Wheel bearings contain balls that roll inside the bearing.

Step3:

Washing the wheel

Skateboard Wheels have spaces that can accumulate anything from the surface you ride on. When wheels have accumulated dirt and sand and other things theyll slow down. Friction will be increased. Skater will have poor stability and balancing will be hard. Dirty wheels will stop skaters from long commuting at fast speed even tricks cannot be performed with dirty wheels. People using skateboards often should clean their skateboard wheels once a month or whenever they feel a need. Cleaning will give wheels a good long life and save you from buying a new pair of wheels.

After long use of skateboard, the wheels will have strongly attached dry dirt which will take time to remove. Prepare a soapy cleaning solution in a container. It takes time for the solution to dissolve the dirt so wheels should be left to stay in there for a while. Soak the wheels in that solution for half an hour. The dirt will have to soften after this time and then will be easily washed. Wash the wheels with enough water so all the mud and dirt are drained. The cleaning solution contains any detergent or soap used for cleaning dishes or other surfaces dissolved in warm water. This solution will act to dissolve the dirt which has become hard. When the dirt is softened by cleaning solution it will be easily drained by water.

Step4:

Scrubbing the wheels

Water will help remove all mud from wheels but to remove deep dirt, hair, threads, and other sticky stuff and for a thorough cleaning scrubbing should be done. Any brush can be used for scrubbing the wheels. Scrubbing will remove all remaining grime. Some brushes are designed to especially scrub wheels but if you dont have one then an old toothbrush or piece of cloth can do the same job. Due to the warm water solution, the entire dirt is soft now so brushing will be easy to remove whatever is left. While scrubbing pay attention to all the tiny spaces in the wheel as well where dirt may remain accumulated. Tiny spaces accumulate most dirt. With great attention scrub off all 4 wheels of the skateboard. Thorough scrubbing totally cleans the wheel surface, this will make the wheel surface look like new.

Step 5:

Drying the wheels

This step is very important and should be done very carefully. After scrubbing the skateboard wheels should be washed with a generous amount of water. When wheels are properly clean dry them using tissue papers or a piece of cloth. Dry the inner and outer surface of the wheel completely. When drying take away the wheels from the washing area or any other source of water. Place wheels in a completely dry environment rub the surface fully and try to remove maximum moisture. Let the wheels stay outside in the air for some time or it is better to keep wheels in some sunlight so that they are fully dry.

Never hurry to place the wheels back after cleaning. The moistened wheels will be heavy and so give a bad skateboard ride experience. Moisture affects other skateboard parts lethally especially wheel bearings and skateboard decks. The bearings will rust. The deck is also affected by moisture and may break due to repeated wetting. Similarly, if wheels are not dried properly the wet wheels will attract again. When wheels have properly dried assemble them to replace them in the skateboard.

Step 6:

Cleaning bearings

Bearings and wheels need to be separately washed because bearings are extremely water sensitive. Theyll easily rust when exposed to water. Bearings become useless after water exposure so while washing wheels keep bearings away at a dry place in some container. Cleaning bearings takes effort as each contains eight small bearing balls which can be misplaced easily. Remove the bearing shield using a pin and then use spray citrus cleaner to remove dirt. Lemon juice can be used also. Bearings can be soaked in alcohol or any other solvent and then after 2 minutes rinse with a solvent.

Dry the bearings in the air or with an air dryer. Wheel bearings need to be lubricated so that wheels will move more smoothly and efficiently. Any oil or grease available can be used. During lubrication it is a must to avoid over lubricating as over lubrication will increase friction and thus the temperature of the wheel bearing. With over greasing, pushing bearing elements while rolling becomes hard and takes more effort.

Advertisement

Bearings after cleaning should be dried quickly because they will rust if moist. It is best to rub off the wet surface and use a drying device for bearings. Drying in the air requires time which might affect the bearing. To know more about the bearings check out the list of Best Bearings available on the market.

Step 7:

Reassembling

Now all skateboard wheels and parts are clean and ready to be replaced. All the parts should be properly dried before placing back because moisture causes erosion and permanent damage. Firstly arrange the wheel bearings. The bearing shield should be put back on the surface of the bearing. The shield helps with keeping the lubricant inside and keep bearing balls rolling smoothly. Placing bearing back into wheel can be difficult for some so shopkeeper use bearing presser which will easily align the bearing in the wheel. To fit bearing into wheel first place one bearing on the truck axle and pry it off. Assembling the wheel is easy as one just needs to reverse the steps done earlier.

Push the wheel on the wheel axle and the bearing will fit in. After one bearing is placed, put a spacer then put the other bearing and push it similarly on the axle so it fits in. Use the same process for all four wheels. The bearings should be properly aligned and tightly fitted. After wheels and bearings are properly placed put the washer and axle nuts and screw the wheel nuts tightly.

To Sum Up

Anyone whether a pro skater or beginner can use these simple steps to clean the skateboard wheels. A Simple and easy method that gives better speed and stability. Give your wheels a good wash after a ride on a rough road or at the weekend after daily commuting for work or studies. Whether using a skateboard for transport or entertainment it doesnt matter, everyone should wash the board because it will not take much time although improve the performance extensively. Shops offer the same service but for a higher cost than cleaning at home.

As with all other devices used daily, skateboards also need maintenance. Skateboards are simple in design and can be easily managed at home after knowing some basic techniques. The steps to Dirty wheels not only affect the speed but the shape and appearance of wheels are affected very much. The wheels arent able to run smoothly over surfaces but instead, the skater will feel jerks. Wheels move smoothly and faster after cleaning and lubrication. Skaters requiring good speed and stability should clean their board often. Without proper maintenance the life span of the board will reduce, performing tricks will become difficult and the need to buy a new skateboard will cost a lot more money.

FAQs

How often should skateboard wheels be washed?

It mainly depends on individual conditions of use. If a skater is using a skateboard for daily commuting then frequent washing is necessary. Also if learning tricks at some dirty or muddy place then wash off immediately so dirt isnt accumulated or wheels will get damaged. For frequent users wash the skateboard once a month at least. People using skateboard occasionally or for only fun should wash off grime once in 3 to 4 months. Dirt if accumulated becomes hard and increases friction so it’s best to wash often.

Why cant wheel bearings be washed with wheels in the water?

Water bearings need to be separated from the wheel as they are water sensitive. Exposure to water even for a short duration will rust the bearings and theyll become useless. Bearings should only be washed with alcohol, solvent, or citrus spray. After rinsing the bearing should be dried promptly as any delay will cause it to rust and affect its smoothness. After drying and rinsing, bearings need to be lubricated as well so that friction is reduced and bearing balls roll smoothly.

Continue Reading

CULTURE

Watch How Old Decks Transformed into Custom Benches in this Video

Published

on

Watch Welcome Skate Shop staff and their friends turn old decks into custom benches in this video released by Vans as part of their efforts to promote artists and creativity. Welcome Skate Shop is based in Leeds, UK.

What’s great about this bench is that you can remove the top (the one made with old decks) and now you have a skateable bench. It has storage too so you have a place for your new skateboards or whatever needs storing.

A skateboarder may need to replace their decks in a few months to a year, depending on how hard they grind and how often they ride. Probably millions of skateboards are discarded each year and most of them end up in landfills.

This is just one of the ways worn-out decks can be repurposed. There are also initiatives to recycle and repurpose old wheels to keep them out of landfills.

Continue Reading

HOWTO

How To Install Skateboard Trucks? Step By Step Guide

Published

on

Not only the riding and doing tricks on a skateboard is fun, but the installation of its part is also exciting.

The structure of the skateboard is amazing as it will not only provide you with entertainment but also will let you understand how skateboards are made.

Just like other parts, the trucks of a skateboard are easy to install too so in this article we will talk about How to Install Skateboard trucks.

The installation process will let you learn and understand what steps to take to get trucks and ride the way you want.

Recommended
Havoc 5.0 Skateboard Trucks, Black

Pair of Havoc Aluminum Alloy Trucks. They come stock with a flush kingpin (less grinding hangups) and cast polyurethane bushings. The hanger Measures 5.0, or roughly 7.63". These will fit any board from 7.4" to 8".

Joining different skateboard parts together and making them ready for riding makes it more reliable for riding.

This is because you would know what joint you have made and how strong they are.

We have prepared this page to teach you the correct and easiest way of installing skateboard trucks on the skateboard.

Make sure you understand every step with proper understanding and have the right tools with you.

The whole process will only take around 25 minutes.

Furthermore, very few instruments are needed for proper installation, so you should not be worried about the tools.

How to Install Skateboard Trucks?

This installation of trucks on a skateboard method is the most effortless procedure that does not require many tools and can easily be performed within 20 minutes.

1. Assembling and Making the Truck Ready To Install

First, collect all the tools you need for the installation process.

Some of the necessary items are mentioned in further detail, which you should have before initiating the installation process.

Keep in mind that each skateboard will need two trucks.

There will be two wheels on each truck.

There is one hanger and one kingpin in each truck.

If you look into the further details, you will see two bushings, two washers, and one nut in each kingpin.

Some of the brands are manufacturing skateboards in which the trucks already contain assembled kingpins and hangers-on.

Now what you need to do is purchase a good quality washer, nuts, bolts, and bushings.

These things are readily available in the market, or you can also look for online purchases.

Now looking at the truck’s baseplate, it contains six holes of different sizes.

Advertisement

Four holes are comparatively smaller and constructed explicitly for bolts and nuts when attaching the bolt and base plate.

The two remaining holes are made for kingpins and hangers and are relatively more significant than the other four.

Now begin the assembling of the truck by sliding the hanger in the larger.

Try both holes but settle it in the one where it gets fixed.

Keep in mind to hold the hanger properly before you secure and tighten it with a kingpin.

Now you need to take the kingpin in your hand and look for the hole in the hanger.

Make sure not to push or force but slightly and smoothly enter the kingpin into this hanger hole and reach the second hole of the base plate.

You will also need a bushing and washer to thread from both sides of the hanger to assemble the kingpin.

Now you have to focus on the ends of the kingpin.

You need to take the washer and bushing in your hand and slide them into both ends individually.

After tightening and assembling all of these four tools in your kingpin, now it’s time to attach the kingpin to the base plate.

This is conveniently done by sliding it into the holes on the base plate.

Take a kingpin and locate it on the kingpin.

Tight this nut with the help of a wrench or a skate tool with you.

Make sure not to tighten them more than needed and not to leave them loose too.

This is important because in case you have pulled the kingpin nut very tightly, it will damage your board.

And thus the bushing will need replacement later on.

Follow the exact instructions mentioned above for assembling the second truck before installation.

Do not skip any step, as if your trucks are not correctly built; they will not be installed appropriately.

2. Installation of the Trucks on the Skateboard

You first need to make the holes in the new grip tape and, for this purpose, make use of something sharp-edged.

Advertisement

You can take a screwdriver for this purpose and poke eight holes in your grip tape.

This will take only a few seconds because the holes are already there on the board.

You only need to slide the sharp object which you have taken from the side of the board towards the tape so that it will get holes in it.

Turbo 9 x 33 Inch Skateboard Grip Tape Sheet Black
  • 9 x 33 Inch Fit Most Sizes of Skateboard, Cruiser or Scooter
  • Industry Standard 80 Grit Griptape
  • Easy Application on Any Skateboards
  • Adhesively Sticky in Cold and Hot Weathers
  • Fun Colors and Varies Design to Choose

This step is only for installing trucks on the new skateboard; otherwise, if you have an old skateboard and you are installing new trucks, then the holes would be present there already.

Make the holes just the way your board contains.

Your skateboard comprises two sets of four holes in them.

Initiate the process of joining the trucks with the board by inserting four bolts on one side of 4 holes from the top side of the board and four bolts on the other side of 4 holes.

Push them properly.

Push them the way you can see them if you turn the board upside down.

Remember to hold the board with one hand in case you are flipping it and checking it.

Now stick the bolts which are slid into the base plate from the small holes.

Remember and keep in mind that the kingpin side of the truck should be facing the inner side of the skateboard, and the hanger side should be facing the outside of the board.

Safely hold the base plate of the board and trucks in their places and put four nuts over four bolts.

Hold both nuts and bolts in their positions using recommended tools and then move one device by holding the other in its place tightly.

Tighten them but make sure not to tighten them more than the required force because if you have pulled them more than needed, it will break the board.

Repeat the similar process of installing the trucks on the skateboard with the exact instructions mentioned above.

Make sure you do not skip any option and always check that in the end, both of the sides of the trucks that contain kingpins are facing each other.

FAQs

Which way do you install skateboard trucks?

Make sure you install the trucks on the skateboard so that both bushing and kingpin face each other from inwards.

Remember to tighten the nuts and screws together slightly.

Advertisement

This will help you hold the trucks and the board in one place before you finally pull them.

And in this way, you will not feel any difficulty installing the skateboard trucks.

Why is my skateboard turning the wrong way?

This is possible in case you had tightened the bushings more than required when you were installing the truck in the initial stages.

You can fix this issue by assembling the bushings or replacing them with a good-quality ones.

Moreover, it’s not necessary to get a new bushing each time.

Instead, you can lose them a little if they are tight and use your skateboard.

Do you need speed washers?

Yes, these are essential tools that should be present in your skateboard.

This is because the primary purpose of a speed washer is to increase and enhance the speed and enhance the longevity of the bearings.

It is done by minimizing the friction between the hanger and the axle nuts.

Furthermore, speed washers help block the passage of dirt and dust to reach your bearings as this dust and dirt can affect the functioning of the trucks and wheels.

Conclusion

Skateboarding becomes more adventurous when you install the board on your own.

Installation of the skateboards involves not only installing tires on the board but also the proper installation of the trucks.

The aggregate installation of the trucks is essential because your board is based on the trucks, and if the trucks are not adequately placed, it means that your board is not stable and safe.

Before installing the trucks on your board, make sure you learn the proper procedure and follow it as it is.

The above-mentioned article contains the details of installing a truck on your skateboard and a step-by-step guide.

Make sure you understand the procedure correctly.

It will help you in assembling the trucks and installing them both.

Please do not skip any step as it will be dangerous for you as skipping a step affects the installation of the trucks.

Advertisement
Continue Reading

How To

HOWTO5 months ago

How to Clean Skateboard Wheels – Simple & Easy Tips For Skaters

Are you in search of techniques to help you clear the dirt from your amazing skateboard wheels? Has your skateboard...

CULTURE5 months ago

Watch How Old Decks Transformed into Custom Benches in this Video

Watch Welcome Skate Shop staff and their friends turn old decks into custom benches in this video released by Vans...

HOWTO6 months ago

How To Install Skateboard Trucks? Step By Step Guide

Not only the riding and doing tricks on a skateboard is fun, but the installation of its part is also...

HOWTO6 months ago

How Tight or Loose Should Skateboard Trucks Be? – Beginners’ Guide

Are you having trouble deciding how tight or loose your skateboard trucks should be? Well, you’ve come to the right...

HOWTO6 months ago

How to Fix Squeaky Skateboard Trucks – Guide For Beginners

Ever experienced a weird squeaky sound coming from the trucks of your skateboard while you are riding on it? It...

HOWTO7 months ago

Top 5 Best Solvents For Cleaning Skateboard Bearings – Reviews & Buyer’s Guide

Skateboard bearings need proper maintenance and if neglected, this can lead to lower speed and performance while skating over time....

HOWTO7 months ago

How to Tighten and Measure Skateboard Trucks – Easy Guide

Just bought new skateboard trucks for your skateboard or want to tighten the trucks on skateboards and now in search...

HOWTO8 months ago

12 Best Skateboards for Beginners in 2022 [ Reviews & Buying Guide ]

Ever seen those teenagers skating and doing tricks on the streets and in skate parks on their skateboards? They look...

Advertisement
Advertisement

Video Archive

Trending